Product Description
Do you know your Auto CV JOINT universal joint failure (universal transmission part)?
The common faults of the CV JOINT universal joint transmission are abnormal noise and vibration caused by the increase of the swimming angle.
Rear drive:
1. Universal joints and expansion joints
Phenomenon: When the car starts or the speed changes suddenly, the transmission device makes a “clang” sound; when the car slows down, the transmission device makes a “crack, croak” sound.
reason:
A. The CV JOINT universal joint bearing is loose due to wear or impact;
B. The spline of the expansion joint of the transmission shaft is loose due to wear or impact;
C. The connecting bolts of the flange of the CV JOINT universal joint are loose.
2. Drive shaft ringing
Phenomenon: When the CV JOINT universal joints and expansion joints are in good technical condition, the transmission shaft makes periodic noises when the car is running; the faster the speed, the louder the noise, and in severe cases, the body chatters, and even the hand holding the steering wheel is paralyzed feel.
reason:
A. The drive shaft is bent or the shaft tube is sunken;
B. The transmission shaft tube and the CV JOINT universal joint fork are not aligned or the transmission shaft is not dynamically balanced;
C. The balance piece on the transmission shaft is lost;
D. The expansion CV joint is not installed according to the mark, which makes the drive shaft unbalanced, and may cause the forks at both ends of the drive shaft to be out of the same plane;
E. The fixing bolts of the intermediate support hanger or the connecting bolts of the flange of the CV JOINT are loose, which makes the position of the transmission shaft deflected;
F. Improper fastening method of the rubber-clamped intermediate support causes the front end of the intermediate drive shaft to deviate from the original axis.
3. Middle support ring
Phenomenon: When the car is running, there is a continuous “beep, beep” sound, and the faster the speed, the louder the sound.
reason:
A. Rolling bearing delamination, pitting, excessive wear or lack of oil;
B. The installation method of the intermediate support is improper, causing the rolling bearing to bear additional load;
C. The rubber ring is damaged;
D. Frame deformation
Our HDAG brand CV JOINTS universal joint quality inspection:
1. Dimensional geometric accuracy:
Sextant accuracy; raceway size; eccentricity; clearance control; spline control; retainer window hole size control; flexibility, smoothness (symmetrical direction and circumferential direction)
2. Material, heat treatment quality
3. Quality stability
4. Static torsion and dynamic performance experiments
Product description
oem LD-504 auto spare parts Inner 22 teeth shift side driveshaft CV JOINT for Lada VAZ 2123 Niva 2121 21213 Samara Gaz CZPT uaz xray old type X-ray dacia sandero stepway 1.5 8391
TOYOTA :
TOYOTA :
TOYOTA : 4342
TOYOTA : 4342
TOYOTA : 4342R20
TOYOTA : 4346R30
TOYOTA : 4346S50
TOYOTA : 4346
TOYOTA : 4347S60
TOYOTA : 4347U90
TOYOTA :
TOYOTA :
TOYOTA : 434708Z033
TOYOTA : 434708Z037
NISSAN : 391571JJ10
NISSAN : 39157117JJ10
NISSAN : 3910110JJ10
NISSAN : 391Y10
NISSAN : 391M570
NISSAN : 391N215
NISSAN : 391571M311
NISSAN : 391571M915
NISSAN : 3910140Y10
NISSAN : 391014M570
NISSAN : 391014M575
NISSAN : 391014M771
NISSAN : 3910163Y10
NISSAN : 391016N215
NISSAN : 391J171
NISSAN : 391N275
NISSAN : 391J071
NISSAN : 391J915
NISSAN : 391E478
NISSAN : 391012J215
NISSAN : 391014N175
NISSAN : 391014N177
NISSAN : 391014N275
NISSAN : 391015J571
NISSAN : 391016J571
NISSAN : 391016J071
NISSAN : 391016J076
NISSAN : 391016J915
NISSAN : 39101AE415
NISSAN : 39101AU415
NISSAN : 39101AU416
NISSAN : 39101AW110
NISSAN : 39101CX116
NISSAN : 39101WF715
NISSAN : 39101WF716
TOYOTA : 4347Z035
TOYOTA : 434708Z039
VAG :
,96396134,512395
NISSAN : 391V70A
NISSAN : 391013U505
NISSAN : 391014V01C
NISSAN : 391014V51A
NISSAN : 391014V70A
NISSAN : 392113U
96348790
VOLVO : 8111304
VOLVO : 86011
VOLVO : 9122833
VOLVO : 9163595
MAZDA : G571550X
MAZDA : G571560X
MAZDA : G565715
OPEL : 374
VAUXHALL : 571
MAZDA : MD1922510
MAZDA : MD1922510A
MAZDA : MD192550X
MAZDA : MD257160XB
OPEL : 374048
OPEL : 374067
OPEL : 37408
OPEL : 374118
OPEL : 374148
OPEL : 374195
OPEL : 90125876
OPEL : 90157212
OPEL : 95718734
OPEL : 9317340
OPEL : 93173430
SAAB : 4242319
NISSAN : 391KD0A
NISSAN : 391019Y015
NISSAN : 39101CNY015
NISSAN : 39211CNHN50
HONDA : 44305S04J60
HONDA : 44305S0A960
HONDA : 44305S0AN60
HONDA : 44305S2H571
HONDA : 44305S2H050
HONDA : 44305S2H950
HONDA : 44305S2H951
HONDA : 44305S2HN50
HONDA : 44305S5AJ50
HONDA : 44305S5AJ60
HONDA : 44305S5AJ61
HONDA : 44305S5AJ62
HONDA : 44305S5C950
HONDA : 44305S5CN50
HONDA : 44305S5CN51
HONDA : 44305S7B950
HONDA : 44305S7C950
HONDA : 44305SOA960
HONDA : 44305SOAN60
HONDA : 44306S0A960
HONDA : 44306S0AN60
HONDA : 44306S2H571
HONDA : 44306S2H950
HONDA : 44306S2H951
HONDA : 44306S5AJ51
HONDA : 44306S5AJ61
HONDA : 44306S5AJ62
HONDA : 44306S5C951
HONDA : 44306S5C952
HONDA : 44306S7B950
HONDA : 44306S7C950
HONDA : 44306SOA960
HONDA : 44306SOAN60
326582
FG02-25-500E
FG02-25-600D
FG02-25-600E
44305-SA2-960
39100ED00A
39101ED00A
39101ED005
44571-SH3-J01,44306-SB2-984
39211-CN000
KIA : 0K558-25-60X
3272.S5
39211-AY125
39101-AX005
39100-AX005
39101-AX000
MAZDA : M 0571 1510A
MAZDA : M 0571 1500C
MAZDA : M 0571 1500D
MAZDA : M 0571 1600A
MAZDA : M 0571 1600B
MAZDA : MD0925500A
MAZDA : MD0925600A
MAZDA : G064-25-600
MAZDA : G564-25-500A
MAZDA : G564-25-600A
MAZDA : G564-25-60X
MAZDA : GR01-25-500
MAZDA : GR01-25-50X
MAZDA : GR01-25-600
MAZDA : GR01-25-60X
MAZDA : GU01-25-500
MAZDA : GU01-25-50XA
MAZDA : GU01-25-50XC
MAZDA : GU01-25-600
MAZDA : GU01-25-60XA
MAZDA : GU01-25-60XD
HONDA : 44014-SNG-000
HONDA : 44305-SDC-A00
HONDA : 44305-SEA-000
HONDA : 44305-SNG-571
HONDA : 44306-SDC-A01
HONDA : 44306-SDE-T00
HONDA : 44306-SEA-000
HONDA : 44306-SNG-571
NISSAN : 39100JD24B
NISSAN : 39100JD52B
NISSAN : 39101JD24B
NISSAN : 39101JD52B
NISSAN : 39211JA00A
NISSAN : 39211JD22B
NISSAN : C9211JA00A
NISSAN : C9211JD22B
NISSAN : C92AAJA00A
NISSAN : C92AAJD22B
NISSAN : C9B11JA00A
NISSAN : C9BAAJA00A
MAZDA : FA8571500A
MAZDA : FA8571600B
MAZDA : FA8125600B
MAZDA : FA8225500A
MAZDA : FD8571500B
MAZDA : FD8571600A
MAZDA : FP0125500C
3272-HY
3272-KW
3273-HQ
3273-KJ
NISSAN : 39100-ED105
NISSAN : 39100-ED305
NISSAN : 39100-ED805
NISSAN : 39101-ED105
NISSAN : 39101-ED305
NISSAN : 39101-ED805
NISSAN : 39211-ED100
NISSAN : C9211-EL10A
KIA : KK38825600
HYUNDAI : 49500-25302
HYUNDAI : 49500-25310
HYUNDAI : 49500-25311
HYUNDAI : 49500-25312
KIA : 49500-25301
KIA : 49500-25302
KIA : 49500-25310
KIA : 49500-25311
KIA : 49500-25312
LAND ROVER : STC3046
40011-M5626
39100-M7270
39101-M7270
39113-M7275
39112-M7225
LAND ROVER : TDJ00571
HYUNDAI : 49500-25400
KIA : 49500-25200
KIA : 49500-25400
LAND ROVER : TDB500110
LAND ROVER : TDJ500030
39101-CA100
39211-CA100
39100-CA100
HONDA : 44305S74E01
HONDA : 44305S74E51
ROVER : GCV1123
ROVER : TFB000070
39211-AY125
39101-AX005
39100-AX005
39101-AX000
CITROEN : 3272TH
CITROEN : 3272WX
CITROEN : 3273QQ
CITROEN : 3273TT
CITROEN : 3273XR
DS : 3272QF
DS : 3272TH
DS : 3273QQ
DS : 3273TT
PEUGEOT : 3272QF
PEUGEOT : 3272TH
PEUGEOT : 3272WX
PEUGEOT : 3273QQ
PEUGEOT : 3273TT
PEUGEOT : 3273XR
39211-CG571
| After-sales Service: | Three Years |
|---|---|
| Warranty: | One Year |
| Condition: | New |
| Color: | Natural Color |
| Certification: | CE, ISO, ISO/Ts16949 |
| Structure: | OEM Standard |
| Customization: |
Available
| Customized Request |
|---|
How to Identify a Faulty Drive Shaft
The most common problems associated with automotive driveshafts include clicking and rubbing noises. While driving, the noise from the driver’s seat is often noticeable. An experienced auto mechanic can easily identify whether the sound is coming from both sides or from one side. If you notice any of these signs, it’s time to send your car in for a proper diagnosis. Here’s a guide to determining if your car’s driveshaft is faulty:
Symptoms of Driveshaft Failure
If you’re having trouble turning your car, it’s time to check your vehicle’s driveshaft. A bad driveshaft can limit the overall control of your car, and you should fix it as soon as possible to avoid further problems. Other symptoms of a propshaft failure include strange noises from under the vehicle and difficulty shifting gears. Squeaking from under the vehicle is another sign of a faulty driveshaft.
If your driveshaft fails, your car will stop. Although the engine will still run, the wheels will not turn. You may hear strange noises from under the vehicle, but this is a rare symptom of a propshaft failure. However, you will have plenty of time to fix the problem. If you don’t hear any noise, the problem is not affecting your vehicle’s ability to move.
The most obvious signs of a driveshaft failure are dull sounds, squeaks or vibrations. If the drive shaft is unbalanced, it is likely to damage the transmission. It will require a trailer to remove it from your vehicle. Apart from that, it can also affect your car’s performance and require repairs. So if you hear these signs in your car, be sure to have it checked by a mechanic right away.
Drive shaft assembly
When designing a propshaft, the design should be based on the torque required to drive the vehicle. When this torque is too high, it can cause irreversible failure of the drive shaft. Therefore, a good drive shaft design should have a long service life. Here are some tips to help you design a good driveshaft. Some of the main components of the driveshaft are listed below.
Snap Ring: The snap ring is a removable part that secures the bearing cup assembly in the yoke cross hole. It also has a groove for locating the snap ring. Spline: A spline is a patented tubular machined element with a series of ridges that fit into the grooves of the mating piece. The bearing cup assembly consists of a shaft and end fittings.
U-joint: U-joint is required due to the angular displacement between the T-shaped housing and the pinion. This angle is especially large in raised 4x4s. The design of the U-joint must guarantee a constant rotational speed. Proper driveshaft design must account for the difference in angular velocity between the shafts. The T-bracket and output shaft are attached to the bearing caps at both ends.
U-joint
Your vehicle has a set of U-joints on the driveshaft. If your vehicle needs to be replaced, you can do it yourself. You will need a hammer, ratchet and socket. In order to remove the U-joint, you must first remove the bearing cup. In some cases you will need to use a hammer to remove the bearing cup, you should be careful as you don’t want to damage the drive shaft. If you cannot remove the bearing cup, you can also use a vise to press it out.
There are two types of U-joints. One is held by a yoke and the other is held by a c-clamp. A full ring is safer and ideal for vehicles that are often used off-road. In some cases, a full circle can be used to repair a c-clamp u-joint.
In addition to excessive torque, extreme loads and improper lubrication are common causes of U-joint failure. The U-joint on the driveshaft can also be damaged if the engine is modified. If you are driving a vehicle with a heavily modified engine, it is not enough to replace the OE U-joint. In this case, it is important to take the time to properly lubricate these components as needed to keep them functional.
tube yoke
QU40866 Tube Yoke is a common replacement for damaged or damaged driveshaft tubes. They are desirably made of a metallic material, such as an aluminum alloy, and include a hollow portion with a lug structure at one end. Tube yokes can be manufactured using a variety of methods, including casting and forging. A common method involves drawing solid elements and machining them into the final shape. The resulting components are less expensive to produce, especially when compared to other forms.
The tube fork has a connection point to the driveshaft tube. The lug structure provides attachment points for the gimbal. Typically, the driveshaft tube is 5 inches in diameter and the lug structure is 4 inches in diameter. The lug structure also serves as a mounting point for the drive shaft. Once installed, Tube Yoke is easy to maintain. There are two types of lug structures: one is forged tube yoke and the other is welded.
Heavy-duty series drive shafts use bearing plates to secure the yoke to the U-joint. All other dimensions are secured with external snap rings. Yokes are usually machined to accept U-bolts. For some applications, grease fittings are used. This attachment is more suitable for off-road vehicles and performance vehicles.
end yoke
The end yoke of the drive shaft is an integral part of the drive train. Choosing a high-quality end yoke will help ensure long-term operation and prevent premature failure. Pat’s Driveline offers a complete line of automotive end yokes for power take-offs, differentials and auxiliary equipment. They can also measure your existing parts and provide you with high quality replacements.
A U-bolt is an industrial fastener with threaded legs. When used on a driveshaft, it provides greater stability in unstable terrain. You can purchase a U-bolt kit to secure the pinion carrier to the drive shaft. U-bolts also come with lock washers and nuts. Performance cars and off-road vehicles often use this type of attachment. But before you install it, you have to make sure the yoke is machined to accept it.
End yokes can be made of aluminum or steel and are designed to provide strength. It also offers special bolt styles for various applications. CZPT’s drivetrain is also stocked with a full line of automotive flange yokes. The company also produces custom flanged yokes for many popular brands. Since the company has a comprehensive line of replacement flange yokes, it can help you transform your drivetrain from non-serviceable to serviceable.
bushing
The first step in repairing or replacing an automotive driveshaft is to replace worn or damaged bushings. These bushings are located inside the drive shaft to provide a smooth, safe ride. The shaft rotates in a rubber sleeve. If a bushing needs to be replaced, you should first check the manual for recommendations. Some of these components may also need to be replaced, such as the clutch or swingarm.
editor by CX 2023-06-06